Canon Color imageCLASS MF9220Cdn Basic Operation Manual page 302

5
Use [▼], [▲] or
<TX Settings>, then press [OK].
6
Use [▼], [▲] or
<Auto-redial>, then press [OK].
7
Use [▼], [▲] or
<Off> or <On>, then press [OK].
– <Off>: Does not redial automatically when a
transmission fails. If you select <Off> and
press [OK], go to step 15.
– <On>: Redials automatically when a
transmission fails. If you select <On> and
press [OK], press [OK] again, then go to the
next step.
(Scroll Wheel) to select
(Scroll Wheel) to select
(Scroll Wheel) to select
Redialing Automatically When the Line Is Busy (Auto Redial)
8
Press the right Any key to select
<Option>.
9
Use [▼], [▲] or
<Redial Times>, then press [OK].
10
Use [▼], [▲] or
the number of redial times, then press
[OK].
You can also use
number of redial times.
(Scroll Wheel) to select
(Scroll Wheel) to set
– (numeric keys) to set the
5-81