Canon Color imageCLASS MF9220Cdn Basic Operation Manual page 231

Introduction to Using Fax Functions
5
Use [▼], [▲] or
<RX Settings>, then press [OK].
6
Use [▼], [▲] or
<Reception Mode Selection>, then press
[OK].
7
Use [▼], [▲] or
the desired receive mode, then press
[OK].
For <Fax/Tel Auto Switch> and <DRPD>, you
can specify optional settings. If you want to
specify the optional settings, press [OK] again.
5-10
(Scroll Wheel) to select
(Scroll Wheel) to select
(Scroll Wheel) to select
■ If you specify the optional settings for <Fax/
Tel Auto Switch>:
① Use [▼], [▲] or (Scroll Wheel) to select
<Fax/Tel Auto Switch>, then press the
right Any key to select <Option>.
② Use [▼], [▲] or
(Scroll Wheel) to select
<Ring Start Time>, then press [OK].
③ Use [▼], [▲] or
(Scroll Wheel) to specify
the duration (4 to 30 seconds) for which the
machine attempts to detect the fax tone
before it starts ringing, then press [OK].
– You can also use – (numeric keys) to
specify the duration.
– If the machine receives a fax, the machine
does not ring and switches to the receive
mode automatically.
– The default setting is <6 Seconds>.