Canon Color imageCLASS MF9220Cdn Basic Operation Manual page 247

Sending Fax Documents
6
Make the scan settings you require.
You can specify the following settings:
– <Color/File Format Settings>: Sets <B&W TIFF
(Divide into Pages)> or <B&W TIFF (Do Not
Divide into Pages)>.*
– <Resolution Settings>: Adjusts the resolution
of originals. (See "Fax, " in the e-Manual.)
– <Density/Background Rem.Set.>: Adjusts the
density and the background color of originals.
(See "Fax, " in the e-Manual.)
– <Original Image Quality Settings>: Adjusts the
image quality of originals. (See "Fax, " in the
e-Manual.)
– <2-Sided Orig. Orientation Set.>: Scans two-
sided originals for sending. (See "Fax, " in the
e-Manual.)
– <Delayed TX Settings>: Sends scanned
documents at a specified time. (See "Fax, " in
the e-Manual.)
– <Send Document Name Settings>: Sets the
document's name. (See "Fax, " in the e-Manual.)
– <Subject/Message Settings>: Sets the subject
line and message body text. (See "Fax, " in the
e-Manual.)
– <Reply-to Settings>: Sets the reply-to address.
(See "Fax, " in the e-Manual.)
– <Register Favorites>: Stores frequently used
send settings for future use. (See "Fax, " in the
e-Manual.)
* If you want to divide multiple images into
single pages and send each page as a separate
file, use [▼], [▲] or
<B&W TIFF (Divide into Pages)>, then press [OK].
If you want to send multiple images as a single
file without dividing them, use [▼], [▲] or
(Scroll Wheel) to select <B&W TIFF (Do Not
Divide into Pages)>, then press [OK].
5-26
(Scroll Wheel) to select
7
Press (Start).
– Scanning starts if the original is placed in the
feeder, and the scanned data is sent to the
specified destination when scanning is
complete.
– To cancel scanning, press the left Any key to
select <Cancel> or press
8
Use [▼], [▲] or
the original size, then press [OK].
9
Press (Start).
– Scanning starts.
– To cancel scanning, press the left Any key to
select <Cancel> or press
(Stop).
(Scroll Wheel) to select
(Stop).