Canon Color imageCLASS MF9220Cdn Basic Operation Manual page 418

You can specify the following settings:
– <Color/File Format Settings>: Specifies the
color type of originals and the file format for
sending. (See "Scan, " in the e-Manual.)
– <Resolution Settings>: Adjusts the resolution
of originals. (See "Scan, " in the e-Manual.)
– <Density/Background Rem. Set.>: Adjusts the
density and the background color of originals.
(See "Scan, " in the e-Manual.)
– <Original Image Quality Settings>: Adjusts the
image quality of originals. (See "Scan, " in the
e-Manual.)
– <2-Sided Orig. Orientation Set.>: Scans
two-sided originals for sending. (See "Scan, " in
the e-Manual.)
– <Delayed TX Settings>: Specifies the
transmission time. (See "Scan, " in the
e-Manual.)
– <Send Document Name Settings>: Sets the
name of the document for sending. (See
"Scan, " in the e-Manual.)
– <Subject/Message Settings>: Sets the
message body text. (See "Scan, " in the
e-Manual.)
– <Register Favorites>: Stores frequently used
send settings for future use. (See "Scan, " in the
e-Manual.)
7
Press (Start).
– Scanning starts if the original is placed in the
feeder, and the scanned data is sent to the
specified destination when scanning is
complete.
– To cancel scanning, press the left Any key to
select <Cancel> or press
8
9
10
(Stop).
Basic Scanning Operations
Use [▼], [▲] or (Scroll Wheel) to select
the original size, then press [OK].
Press (Start).
– Scanning starts.
– To cancel scanning, press the left Any key to
select <Cancel> or press
Follow the instructions on the display,
then press (Start) once for each
original.
(Stop).
8-7