Corrective Action - Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual

Phenomenon
The media take-up unit continues
rotating
The size of clear film cannot be
detected
Cause
There is a foreign object in the
path of the Media Take-up
Sensor .
The Media Take-up Sensor cord
is not connected to the Right
Media Take-up Unit correctly.
The Platen is soiled with ink or
other substances.

Corrective Action

Remove the foreign object from the Media Take-up
Sensor path. Arrange the Basket Cloth and Basket
Rod so they do not interfere with the Media Take-up
Sensor .
Reconnect the Media Take-up Sensor cord as
follows.
1. Turn the printer off.
2. Disconnect the Media Take-up Sensor cord from
the Right Media Take-up Unit and reconnect it
firmly, all the way in.
3. Turn the printer on.
(→"Using the Media Take-up Unit (Optional)," User
Manual)
If the Media Take-up Unit continues rotating, contact
your Canon dealer for assistance.
Open the Top Cover and clean the entire Platen .
(→ , If Paper is Soiled)
3
Troubleshooting