6
If the paper is not visible, lift the Ejection Guide , remove
the Roll Holder , and clear the paper jam from below.
After removing the paper, make sure there are no other
scraps of paper in the printer, and then lower the Ejection
Guide .
7
If the Carriage is on the left, move the Carriage to the
right until it stops.
•
Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur
when you turn on the printer.
8
Lower the Release Lever and close the Top Cover .
9
Turn the printer on.
(→"Turning the Printer On and Off," User Manual)
23
If a Sheet Jams