Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual page 28

If Vertical Lines are Warped or Colors are Misaligned
Perform adjustment as follows.
1
Load paper.
(→ , Attaching the Roll Holder to Rolls)
(→ , Loading Rolls in the Printer)
(→ , Loading Sheets in the Printer)
2
On the Tab Selection screen of the Control Panel , press
◄ or ► to select the Settings/Adj. tab (
• If the Tab Selection screen is not displayed, press the Menu button.
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Adjust Printer , and then press
the OK button.
5
Press ▲ or ▼ to select Head Posi. Adj. , and then press
the OK button.
6
Press ▲ or ▼ to select Auto(Standard) ,
Auto(Advanced) , or Auto(Expansion) , and then press
the OK button.
A test pattern is printed for adjustment.
Adjustment is now fi nished if you have printed on a roll.
7
If you are printing on sheets, a confi rmation message is
displayed requesting you to continue printing. Press the
OK button and follow the instructions displayed.
).
28
Ready
OK:Setting/Adj. Menu
Maint. cart.
Remaining Amount