Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual page 48

Error Messages
Error Message
Paper position not suitable for
borderless printing.
PaprWidth Mismatch
Cause
Because paper expands or
contracts depending on the
environment of use, it may
become narrower or wider than
the supported width for borderless
printing.
The paper is loaded askew.
When Detect Mismatch in the
Control Panel menu is set to
Pause or Warning , the width of
the loaded roll does not match the
width specified in Fit Roll Paper
Width in the printer driver.
48
Corrective Action
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
Use each type of paper only where the recommended
environmental conditions are met. For details on
environmental conditions for various paper, see the
Paper Reference Guide .
(→"Types of Paper," User Manual)
Select None when you have set Detect Mismatch in
the Control Panel menu to Warning .
However, note that this error may affect the printing
quality.
Press ▲ or ▼ to select Change Paper and straighten
the paper so that the edges are between the ink
grooves for borderless printing.
Insert the roll firmly until it touches the flange of the
Roll Holder .
(→ , Attaching the Roll Holder to Rolls)
Select None when you have set Detect Mismatch in
the Control Panel menu to Warning .
However, note that this error may affect the printing
quality.
Press ▲ or ▼ to select Print With Border , and
then press the OK button to continue printing. The
document will be printed with a border.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
Press ▲ or ▼ to select Print , and then press the OK
button to resume printing.
However, note that this error may cause paper jams
and affect the printing quality.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
Follow these steps to replace the roll to match the
width specified in the printer driver.
1. Press ▲ or ▼ to select Change Paper , and then
press the OK button to remove the roll.
(→ , Removing the Roll from the Printer)
(→"Removing the Roll Holder from Rolls," User
Manual)
2. Replace the paper with paper compatible for
borderless printing.
(→ , Attaching the Roll Holder to Rolls)
(→ , Loading Rolls in the Printer)
The printer now starts printing the print job.
Make sure the roll width selected in the dialog box
displayed when you select Fit Roll Paper Width in
the printer driver matches the width of the roll loaded
in the printer, and then try printing again.