Overview And Warnings - Structural Concepts Encore Series Installation & Operating Manual

OVERVIEW / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING DIAGRAM / CORDS & PLUGS
OVERVIEW

These cases should be installed and operated
according to these instructions to ensure proper
performance. Improper use will void warranty.

This unit is designed for the display of products in
ambient store conditions where temperatures and
humidity are maintained at a maximum of 75 °F and
55% relative humidity.
COMPLIANCE

Performance issues when in violation of applicable
NEC, federal, state or local electrical codes are not
covered by warranty.

See compliance specifics below.
WARNING
ELECTRICAL
HAZARD
CAUTION
WARNINGS

PRECAUTIONS

WIRING DIAGRAM


This equipment MUST be installed in compliance with
all applicable NEC, federal, state and local
electrical and plumbing codes.
Risk of electric shock.
Disconnect ALL ELECTRICAL SOURCES before servicing.
CAUTION! LAMP REPLACEMENT GUIDELINES
LED lamps reflect specific size, shape and overall design.
Any replacements must meet factory specifications.
Fluorescent lamps have been treated to resist breakage and
must be replaced with similarly treated lamps.
CAUTION! GFCI BREAKER USE REQUIREMENT
If N.E.C. (National Electric Code) or your local code
requires GFCI (Ground Fault Circuit Interrupter) protection,
you MUST use a GFCI breaker in lieu of a GFCI receptacle.
CAUTION! POWER CORD AND PLUG MAINTENANCE
Risk of electric shock. If cord or plug becomes damaged,
replace only with cord and plug of same type.
3
This sheet contains important warnings to prevent
injury or death. Please read carefully!
This sheet also contains important precautions to
prevent damage to unit, power cord and plug or
merchandise. Please read carefully!
Each case has its own wiring diagram folded and
in its own packet.
Wiring diagram placement may vary; it may be
placed near ballast box, field wiring box, raceway
cover, or other related location.
COMPLIANCE
WARNING