When Copying - Canon PIXMA MP950 User Manual

Cause
The size of the print data is too large.
Performing automatic duplex
printing

When Copying

Cause
The document is not loaded
correctly.
The quality (print quality) displayed
on the LCD is not suitable for the
document.
The document is not loaded with the
side to be copied face down.
The document or photograph set on
the Platen Glass was printed from
your machine.
The Platen Glass or FAU Protective
Sheet is dirty.
122 Troubleshooting
Check the size of the print data. For Windows XP and Windows 2000, if the
size of the data is too large, part of it may be lost. When the spool format is
EMF, follow the procedure below.
1. Open the printer properties dialog box.
2. On the [Page Setup] tab, click [Print Options].
3. Select the [Reduce spool data size] check box, and click [OK].
Note
When Reduce spool data size is set, the print quality may be degraded.
Select [Use reduced printing] in the printer driver. It may solve the
problem.
1. Open the printer properties dialog box.
2. Click [Print Area Setup] in the [Page Setup] tab and select [Use reduced
printing].
1. In the [Print] dialog box, select [Duplex Printing & Margin] from the pop-
up menu.
2. Select [Automatic Duplex Printing], and select [Use reduced printing] in
Print Area.
Check that the document is loaded correctly on the Platen Glass.
See "Loading Documents" on page
Set the image quality suitable for the document.
See "Copying" on page 38.
When loading the document on the Platen Glass, the side to be copied
should be face down.
Image quality may be poor if you copy a printed document or photograph.
Instead, reprint the photograph directly from the digital camera, or the
document from your computer.
Clean the Platen Glass or FAU Protective Sheet.
See "Cleaning the Platen Glass and Document Cover" on page
Action
Action
18.
109.
Chapter 12