Canon PIXMA MP950 User Manual page 74

When printing photos with the digital device connected to the machine, it is
Note
advisable to use the AC adapter supplied with the device. If you use the device
battery, be sure to charge it fully.
1
Set up the machine.
Refer to the Easy Setup Instructions to set up the machine and make it ready for printing.
Note
2
Turn on the machine.
See "Turning on the Machine" on page
3
Load the paper in the machine.
See "Loading Paper" on page
4
Connect the PictBridge compliant device to the machine.
Note
(1) Ensure that the device is turned off.
(2) Connect the device to the machine using the USB cable (for connection to a computer)
supplied with the device.
Note
72 Printing Photographs Directly from a Compliant Device
The Print Head cannot be aligned using the controls of the digital device.
If the Print Head alignment is not yet performed, execute automatic Print
Head alignment, see
17.
19.
Depending on the model or brand of your device, you may have to select
a print mode compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually
after connecting the device to the machine.
Perform necessary operations according to the instruction manual
supplied with the PictBridge compliant device.
Some types of the PictBridge compliant devices do not turn on
automatically, when connected to the machine. If the device does not turn
on automatically, turn it on manually.
"Aligning Print Head automatically" on page 108.
Chapter 5