6
Slowly close the Document Cover and press [OK].
The film is scanned.
Note
Printing Photographs
Let's select a scanned photo and specify the number of prints, and print it.
Printing Photo Displayed on the LCD (Single-photo print)
Print a scanned photo.
1
Prepare for printing.
(1) Load paper.
See
"Loading Paper" on page
(2) Ensure that the proper paper source is selected.
See
"Changing the Paper Source" on page
Note
(3) Scan a photo or a film.
See
"Scanning a Photo" on page 61
2
Select the print menu.
(1) Use [
] or [
The photo selection screen is displayed.
Chapter 4
The photo or film is rescanned before printing starts. Do not open the
Document Cover or remove the photo or film from the Platen Glass
until printing is complete.
If the film was not scanned properly, see
page
118.
Press [PHOTO/FILM] when loading another film. If <Do you want to
clear the scanned photo?> appears on the LCD, select <Yes>, press
[OK] to delete the previous image data, then go to main step 2.
19.
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit
when feeding paper from the Cassette.
or
] to select <Single-photo print>, then press [OK].
(2)
"Cannot Scan Films" on
23.
"Scanning a Film" on page
Photo Printing from Photo or Film
62.
67