Problems Scanning
Scanner won't work
Cause
The machine is not recognized by
the computer.
ScanGear MP won't start
Cause
Scanner driver (ScanGear MP) not
installed.
Scanner is not selected in the
application software.
The feature of the application
software does not support TWAIN.
136
Troubleshooting
Restart the computer.
This may enable the computer to recognize the machine.
Set the Setup CD-ROM and install the software.
In the application software, select this machine in [Select Source] or
[Import] under the [File] menu.
Example: ArcSoft PhotoStudio
*Display may differ depending on your operating system.
If you are using an older application software, the menu item may be
named [Select TWAIN-compliant device] instead of [Select Source].
Start ScanGear MP from within a TWAIN compatible software.
Action
Action
Chapter 12