Canon PIXMA MP950 User Manual page 27

3
Load the paper.
(1) Load the paper into the Auto Sheet Feeder with the print side facing UP.
(2) Align the paper stack against the Cover Guide on the right side of the Paper Support.
Important
(3) Pinch the Paper Guide and slide it against the left side of the paper stack.
(3)
Important
Note
Chapter 1
Ensure that the Cover Guide stands when you load paper in the Auto
Sheet Feeder.
(A)
Do not load the paper beyond this Load Limit Mark (A).
You can use general copy paper or Canon's Super White Paper SW-
201.
You can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm
or 0.52 inches in height) in the Auto Sheet Feeder. However, the paper
may not be fed normally depending on its media type or your
environment where the temperature and humidity are high or low. In
that case, reduce the amount of paper to half (approx. 0.2" / 5 mm in
height).
Remove the printed sheets from the Paper Output Tray before the
count reaches 50.
Do not touch the printed surfaces until the ink dries. For specific drying
times, refer to the instructions packaged with your media.
(1)
Before Printing
(2)
25