Chapter 10
Changing the Machine Settings
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extended copy amount as an example.
1
Press [ON/OFF] to turn on the machine.
See
"Turning the Machine ON and OFF" on page
2
Press [Menu].
3
Display the Device settings screen.
(1) Use [
] or [
The Maintenance/settings screen is displayed.
(2) Use [
] or [
The Device settings screen is displayed.
4
Select the menu.
(1) Use [ ] or [ ] to select the setting item, then press [OK].
Example: select <Print settings>.
The setting screen for the selected item is displayed.
92
Changing the Machine Settings
] to select <Maintenance/settings>, then press [OK].
(1)
] to select <Device settings>, then press [OK].
(2)
(1)
17.
Chapter 10