The Print Result Not Satisfactory When Copying; Printing Does Not Start - Canon Pixma MP520 series Quick Start Manual

Photo all-on-one printer
Hide thumbs Also See for Pixma MP520 series:
Table of Contents

Advertisement

The Print Result Not Satisfactory When Copying

Cause
The original document is not loaded
correctly.
The original document is not loaded
with the side to be copied faced down.
The original document is a printout
from this machine.
The Platen Glass or the inner side of
the Document Cover is dirty.
If these do not resolve the problem, also see "Print Results Not Satisfactory" on page 73.

Printing Does Not Start

Cause
The machine is not powered on. / The
power cord is not connected.
Ink tank is empty.
Ink tank not installed in proper position.
Ink tank is not installed securely.
Check that the original is loaded correctly on the Platen Glass.
See "Loading Original Documents" on page 6.
When loading the original on the Platen Glass, the side to be copied should be
faced down.
Print quality may be reduced if you copy a printout.
Instead of copying a printout, print the original directly either from the digital
camera, memory card, or your computer.
Clean the Platen Glass and the inner side of the Document Cover.
See "Cleaning the Exterior of the Machine" on page 59.
Make sure that the power cord is securely plugged into the Power Cord
Connector of the machine.
Plug the power cord all the way in, since it may be difficult to plug.
See "An Error Message Is Displayed on the LCD" on page 68 to identify the ink
error, and then take the appropriate action depending on the error condition.
Open the Scanning Unit (Printer Cover) and check the ink lamps.
If there is still sufficient ink but its ink lamp is flashing red, an ink tank may be
installed in a wrong position.
Confirm that the ink tanks are installed in the appropriate positions. See
"Replacing an Ink Tank" on page 43.
Open the Scanning Unit (Printer Cover) and check the ink lamps.
If the ink lamp is not lit, press the
place. The ink lamp lights up red when the ink tank is fully inserted.
Action
Action
mark on the ink tank until it clicks into
Troubleshooting
77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents