Aligning Print Head Automatically - Canon PIXMA MP950 User Manual
All-in-one printer
Hide thumbs
Also See for PIXMA MP950:
- Start here (2 pages) ,
- Supplementary manual (6 pages) ,
- Service manual (55 pages)
Table of Contents
Advertisement
(2) If the problem remains, make sure that ink remains in the ink tank. Then turn off the
machine's power for at least 24 hours, and perform deep cleaning of the Print Head
again.
(3) If the problem still remains, the Print Head may be damaged. Contact the Canon
Customer Care Center
Aligning Print Head automatically
If the ruled lines are shifted after running the Print Head maintenance, align the Print Head.
There are two ways to align the Print Head, automatic or manual. First, try adjusting the Print
Head automatically. If the automatic Print Head alignment does not work or if you wish, you can
adjust the Print Head manually. See
Note
1
Press [ON/OFF] to turn on the machine.
See
"Turning on the Machine" on page
2
Execute automatic Print Head alignment.
(1) Display the Maintenance screen.
See
"Performing Maintenance" on page
(2) Use [ ] or [ ] to select <Auto head align> and then press [OK].
The confirmation screen is displayed.
Note
(3) Load two sheets of A4- or Letter-sized plain paper in the Auto Sheet Feeder.
(4) Use [ ] or [ ] to select <Yes> and then press [OK].
A pattern is printed and the Print Head is automatically aligned. It takes about five
minutes until printing completes.
108
Routine Maintenance
"Adjusting the Print Head Manually" on page
The Cassette does not feed paper for aligning the Print Head. Load
paper in the Auto Sheet Feeder.
Ensure that the Inner Cover is closed.
17.
Select <Head alignment print> to print the current adjustment values.
(2)
(4)
103.
117.
Chapter 11
Hide quick links:
Advertisement
Chapters
Table of Contents
