Bay-Tek WILLY CRASH GAME Setup

Hide thumbs Also See for WILLY CRASH GAME:

Table of Contents

Download this manual

WILLY CRASH GAME SETUP

The game will arrive on one pallet. Please inspect the pallet for

shipping damage and report immediately to the freight company

if any damage is found.

Unbox the pallet and remove the plastic from the top of the

player console. This is the marquee.

Please unwrap the marquee and proceed to assembly instructions.

Tools Needed:

1 step ladder (4-6 foot)

Remove the keys from the small plastic bag taped to the top

console.

Unlock the front door using a H95 key.

Unlock the coin box door using a E00 key.

Remove the hardware kit and power cord from the coin

box.

Close and lock coin box door, remove key to allow the

front door to close fully.

# 2 Square bit

Table of Contents

Do you have a question about the WILLY CRASH GAME and is the answer not in the manual?

Page 1 WILLY CRASH GAME SETUP The game will arrive on one pallet. Please inspect the pallet for shipping damage and report immediately to the freight company if any damage is found. Unbox the pallet and remove the plastic from the top of the player console.
Page 2 WILLY CRASH GAME SETUP Unlock and remove the back door using a H95 key. Route the power cord through the hole in the back of cabinet, and plug into the line filter inside the game. Replace the back door. Peel the protective plastic film from the marquee artwork, and apply the bonus ticket value desired to the white outline as shown.