Specifications; Intent Of Use; Placing Tool Specification - Stanley AV 10 Instruction And Service Manual

E N G L I S H

2. SPECIFICATIONS

2.1 INTENT OF USE

The AV™10 Installation Tool is principally a piston and cylinder assembly. When coupled hydraulically and electrically to
a compatible hydraulic power source and the relevant nose assembly is attached, it is then used to install 3/8" Avdelok®,
5/16" to 3/8" Avbolt® and Ø18mm Avseal® II in Industrial Environments.
The placing tool and hydraulic pump unit may only be used in accordance with the operating instructions for placing
Stanley Engineered Fastening structural rivets.
Refer to the table below for the list of applicable fasteners and associated nose equipment. Refer to the datasheets listed in
the table for the relevant nose assembly instructions.
DO NOT use under wet conditions or in the presence of flammable liquids or gases.
FASTENER
TYPE
AVDELOK®
AVBOLT®
AVSEAL® II
Refer to the illustration on page 7 for the identification of the nose assembly dimensions 'A' and 'B' .
The safety instructions must be followed at all times.

2.2 PLACING TOOL SPECIFICATION

Force:
Pressure:
Stroke: Piston Stroke
Weight: Without nose equipment
Hydraulic Oil: Enerpac® Hydraulic Oil – HF-95X
Product Range:
Additional Features:
6
SIZE
3/8"
5/16"
3/8"
16 mm
16 mm flanged
18 mm
SPECIFICATION
Pull at stated pull pressure
Push Off at stated return pressure
Pull
Return
Avbolt®
Avseal® II
Avdelok®
Stem Ejection – Front or Rear
Seal Arrangement
Hydraulic Bearing Rings
Protective Handle / Hose Gator
Protective Hose Guard
Hose / Cable Retention Clamps
NOSE ASSEMBLY
PART NUMBER DIM. 'A'
73430-03100 87 mm
73430-03300 92 mm
73430-03200 92 mm
73430-05000 95 mm
73430-05000 95 mm
73430-05200 95 mm
METRIC
25.0 mm
10.0 mm
18.0 mm
10.0 mm
NOSE ASSEMBLY
DATASHEET
DIM. 'B' PART NUMBER
28 mm 07900-00919
27 mm 07900-00905
29 mm 07900-00905
27 mm 07900-00840
27 mm 07900-00840
27 mm 07900-00840
IMPERIAL
55.0 kN 12364.0 lbf
26.0 kN 5485.0 lbf
510 bar 7397 PSI
200 bar 2901 PSI
0.98 in
3.5 kg 7.7 lb
3/8 in
3/8 in
Rear
Twin Lip and Wiper Seals
Yes – Front and Rear
Yes
Yes
Yes