Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Blastrac BDC-454
Summary of Contents for Blastrac BDC-454
- Page 1 OPERATING MANUAL BDC-454 VERSION 2.2...
-
Page 2: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY in accordance with Appendix II sub A of Directive 2006/42/EC BLASTRAC B.V. Utrechthaven 12 NL - 3433 PN NIEUWEGEIN Tel: 0031 (0)30 601 88 66 Fax: 0031 (0)30 601 83 33 Info@Blastrac.nl The Netherlands We declare under our sole responsibility that the machine as described below conforms with the Health and Safety requirements of the European Directive for machine Safety. -
Page 3: Table Of Contents
Table of contents EC Declaration of Conformity 1. Introduction 2. Machine description 3. Safety Safety precautions - general Safety precautions - with regard to transport Safety regulations – with regard to maintenance 4. Before operation Checkpoints of power supply 5. Operation Starting / stopping the machine Work with the machine Interrupting work... -
Page 4: Introduction
Retains at least 99,9 % of particles measuring ≥ 3 µm Class H13 HEPA filter in accordance with EN1822 Application The BDC-454 is especially designed to be used in combination with Blastrac machines. Contact Blastrac B.V. for the correct execution and combinations. - Page 5 Dust bin kit Hour counter Big bag kit Fan motor ON/OFF Longo pack kit Compressor ON/OFF Drain valve. Open regular to remove water Rubber impact plate from the air tank. Manometer, shows the pressure of the air tank. The pulse to clean the filters must 11 Air filter compressor be given at 5 –...
-
Page 6: Safety
It should only be used for removing not-inflammable dust or substances. The unit should not be used near flammable gasses or substances. The BDC-454 must not be applied for carcinogenic or asbestos substances. Do not use the unit when it is damaged. ... - Page 7 Safety regulations The following sticker is placed on the machine. Meanings of these symbols are: Ear protection is obliged Safety glasses with lateral protection are obliged CE-mark on this machine Safety shoes obliged Consult the manual before operating the machine Personnel must tie back long hair and not wear loose clothing or jewellery including rings.
-
Page 8: Before Operation
4. Before operation Before using the machine it is essential to inspect the machine. It is not permitted to use the machine if the machine safety is not according the checkpoints below. Checkpoints of electrical safety Use only extension cables for extending the main cable that are sized and marked in accordance with the overall power consumption of the machine. -
Page 9: Maintenance
Store the cleaned and dry machine in a dry and humid free room. Protect the electrical motors from moisture, heat, dust and shocks. All repair work must to be done by qualified Blastrac personnel, this to guarantee a safe and reliable machine. Any guarantee on the machine is expired when: ... -
Page 10: Filter Replacement
Filter replacement By mounting new filter cartridges pay attention that their gasket at the upper side lies firm at the sheet steel of the filter chamber. A tilt of the filter cartridge result in leakage and they suction contaminants in the clean part and consequently blow they backwards in the outer air. -
Page 11: Compressor
Advised is to take contact with Blastrac Support in order to prevent operational problems. Compressor Replacement or cleaning of the air filter of the compressor (item 11 page 5) is depending on the environment in which the Dust collector is operating. -
Page 12: Contact
Headquarter Blastrac Poland Blastrac Italy Blastrac The Netherlands Golina, Dworcowa 47a S.S. 10 Padana Inferiore, 41 Utrechthaven 12 PL – 63-200 Jarocin IT – 29012 Caorso (PC) NL – 3433 PN Nieuwegein Tel – 0048 627 40 41 50 Tel – 0039 0523 81 42 41 Tel –...
Need help?
Do you have a question about the BDC-454 and is the answer not in the manual?
Questions and answers