Operating Your Stove; Stove Control Devices - Valor MADRONA MF28JN Homeowner's Manual

Operating your stove

Stove control devices

There are two ways to control your stove.
1. Thermostatic Remote Control: Turns fi re ON, OFF,
controls fl ame height and can be programmed
to function automatically. See Appendix A-Remote
Control Operation on pages 20-23.
2. Wall Switch (optional): Turns fi re ON, OFF and
controls fl ame height.
Remote Control
Turn your stove ON
WARNING
STOP IF YOU SMELL GAS! DO NOT LIGHT!
See cover page immediately!
Press and hold:
- + buttons on remote, or
- ON-OFF button on wall switch
until a short beep confirms the start sequence has
begun; release buttons.
Continuing beeps confirm the ignition is in process.
The pilot lights up, then the stove.
If you need to light up the pilot manually, see the
Lighting Instructions card attached to the stove —
see Locating stove and lighting information on page 7
to know how to access it. Also, a copy of this card is
reproduced in Appendix A of the stove Installation
Manual.
Wall Switch
(optional)
Turn your stove OFF (including pilot)
Press and hold:
- button on remote, or
- ON-OFF button on wall switch
If the flames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
indicating that the valve has received the signal from
the remote control.
In the unlikely event that you cannot turn off your
stove with the remote control handset, use the wall
switch; if the wall switch malfunctions and will not
turn off the stove, wait 8 hours and the stove will
automatically go to pilot. You can then access the
controls inside your stove.
WARNING
Risk of severe burns! Surface of the stove
are very hot during operation! Ensure
fi repace has cooled off before accessing
control.
Alternately, turn off your house gas supply. In all
cases, call your dealer for service assistance.
ON:
parallel
to pipe
To use additional functions of your Remote
Control such as temperature or program
settings, visit valorfireplaces.com/remotes
OFF:
perpendicular
to pipe
9