Checking Pilot And Burner Flames - Valor MADRONA MF28JN Homeowner's Manual

Checking pilot and burner flames

The pilot light and burner flames should be checked
periodically. Check after the fire has been on for at least
30 minutes. The pilot flame must cover the tip of the
thermocouple probe. The main burner flame pattern will
vary depending on the type of installation and climatic
conditions.
Performance of propane gas stoves may be affected by the
quality of commercial gas supplied in your area.
The stove area must always be kept clear and free from
combustible materials, gasoline and other flammable vapors
and liquids.
Inspect the vent terminal outdoors regularly to ensure that
it is not obstructed by snow, trees, bushes, leaves, or other
objects.
Inpect the vent system regularly. We recommend at least
once a year.
Thermocouple
probe must be
in flame
Note
The height and color of your flames can vary depending
on fuel type, fuel quality and mixture, altitude, and
aeration adjustment at or after installation.
The photos of typical flame appearance are for
illustrative purposes only. Your stove may be operating
normally but may appear slightly different than the
photos.
Venting configuration, elevation, burner aeration
setting and local fuel heating value can all affect flame
appearance.
16
Typical fl ame appearance
Traditional Logs
Pilot light
Driftwood Logs
Pilot light
Splitwood Logs
Pilot light