Button - RGBlink Q4L User Manual

3.4 Button

START
Short cut buttons to enter Split Mode menu when the device is used for the first time, If not, it will enter
Presentation Mode.
4K Input Module Mode
Split Layout
PIP
Background Signal
Background Mode
BG
On or Off background
When layout is selected, push BG button to select input source.
L1/L2/L3/L4
Layer selection after background is set. When the layer is select the button will flash. If there the layout chosen
previously is without PIP or less PIP than 4, users can push the unlighted Layer button to open up more PIP.
IN1/IN2/IN3/IN4/IN5/IN6/IN7/IN8
Select input source 1~8, when the source is selected, the button will flash.
SAVE
Short cut button to SAVE scene to SECEN 1-10 by pushing number buttons
LOAD
Short cut button to Load saved scene from SECEN 1-10 by pushing number buttons.
Q4L/Q4L-4K
>> Left Screen Source
>> Right Screen Source
V Total
H Total
Width 1
User Manual
Height 1
Background Details
Save Setting
Reset Parameters
24