RGBlink Q4L User Manual page 19

Left/Right Screen Source
Select input source
H Total, V total
Set total height and total width for the splicing output display.
Height 1
Set the height of the first output display.
Q4L shows the parameters required based on the Split mode, for example, if the split mode is V 1/3. the Width 1
(width of first output display )and Width 2 (width of second output display) shall be set; if the split mode is Cross,
Height 1 and Width 1 will be shown to set.
Background Details
To Scale and Crop the background.
Layer 1
Scale
Crop
Save Setting
Save Setting to confirm above.
Reset Parameters
Cancel above setting.
Q4L/Q4L-4K
>>
Width
>>
Height
>>
H Pos
V Pos
Save Setting
Preset Scale Parameters
User Manual
1920
1080
0
0
19