Table of Contents
Advertisement
Connection
6.2
Connection
IMPORTANT!
Make sure that the relay card/control card is disconnected from the power before connecting periph-
eral equipment. Risk of material damage.
1. Route the cabling through the grommets.
2. Connect the relevant controller. See Section 6.2.1 - 6.2.2.
3. Where applicable, connect the warning lights. See Section 6.2.3 - 6.2.4.
4. Where appropriate, plug in cab switch (CS) and open platform alarm. See section 6.2.5 -6.2.7.
5. Replace the cable grommets and connection unit, see section 6.1.2.
ZePRO1
www.zepro.com
ZAHD, ZAEHD 150/200-155/175
TLC-B1
41
Advertisement
Table of Contents
