Connection; Connection Unit - Zepro ZAHD 150/200 Installation Instructions Manual

Connection

6 Connection
6.1

Connection unit

6.1.1 Before connection
1. Remove the connection unit cover, secured with four screws, see Image 67.
2. Loosen the unused cable grommets. Cables can now be installed/removed/adjusted in the grommets.
6.1.2 After connection
1. Tighten the cable grommets when all the cables are in a suitable position.
2. Replace the connection unit cover, see
Relay card/control card
40
Image 67.
Image 67. Connection unit
ZAHD, ZAEHD 150/200-155/175
www.zepro.com