Table of Contents
Advertisement
INTRODUCTION
Overview
This addendum is specific to the usage of the Hydronic PURE
Control™ and should be used in conjunction with the current
version of the Endura or Endura+ Installation and Operation
manual.
Fulton reserves the right to change any part of this
addendum.
When using this addendum, observe all warnings, cautions,
and notes in literature, on stickers and labels, and any
additional safety precautions that apply. Follow all safety
codes and wear appropriate safety protection. Follow all
jurisdictional codes and consult any jurisdictional authorities
prior to installation.
Warnings & Cautions
WARNINGS and CAUTIONS appear in various chapters of this
addendum. It is critical that all personnel read and adhere to
all information contained in WARNINGS and CAUTIONS.
ƒ
WARNINGS must be observed to prevent serious injury
or death to personnel.
ƒ
CAUTIONS must be observed to prevent damage
or destruction of equipment or loss of operating
effectiveness.
All Warnings and Cautions are for reference and guidance
purposes, and do not substitute for required professional
training, conduct, and strict adherence to applicable
jurisdictional/professional codes or regulations.
Disclaimers and Local Codes
Installation of the equipment shall conform to all the
requirements of all national, state and local codes established
by the authorities having jurisdiction or, in the absence
of such requirements, in the US to the National Fuel Gas
Code ANSI Z223.1/NFPA 54 latest edition, and the specific
instructions in this addendum. Authorities having jurisdiction
should be consulted prior to installation.
1-2
Hydronic-PURE-Control-UserManual-211214
When required by local codes, the installation must conform
to the American Society of Mechanical Engineers Safety Code
for Controls and Safety Devices for Automatically Fired Boilers
(ASME CSD-1).
The boiler heat exchanger is manufactured and stamped
in accordance with ASME Boiler and Pressure Vessel Code,
Section IV for a maximum allowable working pressure
and operating temperature of 160 psig and 210°F (99°C),
respectively.
SECTION 1
© Fulton Group N.A., Inc. 2020
Advertisement
Table of Contents
