Creality HALOT-ONE PLUS User Manual page 20

12. WIFI Print
①
1. Slicer
1. Open the slicer software of HALOT BOX, click"open"
on the left of the screen and add model file.
3. Click icon ①→Setting slice printing parameters②
→Click.
②
①
②
2. If the model needs to add support, click the upper
left icon to set corresponding parameters.
Select "Remote Printing"
4. wait for slice to be finished→
for WiFi printing.
5. Once the transmission is over, select the file on the
machine to start printing.
Note: Make sure the HALOT BOX and the printer are
connected to the same WiFi.
16