Team And Executive/Secretary Functions; With Trunk Keys; Using Trunk Keys - Octopus F200 Operating Instructions Manual

Team and Executive/Secretary Functions With Trunk Keys
Step by Step
108
Team and Executive/Secretary
Functions With Trunk Keys
If this function has been configured (contact your service personnel),
you belong to a team of users for whom special keys were pro-
grammed:
• Trunk keys (MULAP keys)
• Direct station selection keys
• Group call key
(not on the executive telephone in an executive/secretary team)
• Ring transfer keys
(only in an executive/secretary team)
As a team member, you can also program these keys yourself (" MU-
LAP key", " Direct station select", " Group call on/off", " Ring Transfer:
on/off Page 71. You can also program a call forwarding key ("For-
ward Line") for each line.

Using Trunk Keys

The programmable sensor keys on multi-line phones function as
trunk keys. Each key that is assigned the function "line" is handled as
a line. This means up to six lines can be configured.
A distinction is drawn here between primary, secondary and phan-
tom lines. Each of these line types can be used on a private or shared
basis Page 109.
Trunk keys are configured by the relevant service personnel.
Primary line
All multi-line telephones have a primary line. This line can be reached
in the usual manner via your public phone number. Incoming calls
are signaled on this line.
Secondary line
The secondary line on your phone is used as a primary line by anoth-
er subscriber in the system. Your primary line, which is configured on
another telephone in the system, simultaneously functions as the sec-
ondary line on that telephone.