Using System Functions From The Outside; (Disa: Direct Inward System Access) - Octopus F200 Operating Instructions Manual

Step by Step

Using System Functions from the Outside

(DISA: Direct Inward System Access)

If this function has been configured (contact your service personnel),
you can set up external outgoing calls from outside the system, just
like an internal user. You can also activate and deactivate the follow-
ing functions in your system:
• Resetting Services and Functions,
code: #0
• Call forwarding, code:
• Locking and unlocking telephone,
code: 66/#66
*
• Saving Your PIN,
code: 93
*
• Send a message,
code: 68/#68
*
• Leaving an advisory message,
code: 69/#69
*
• Group ringing, code:
• Group call, code:
• Suppress caller ID,
code: 86/#86
*
• Waiting tone, code:
• Open door, code:
• Door opener on/off, code:
• Control relay, code:
• Do not disturb, code:
• Ringer cutoff function, code:
• Speed-dialing, code:
• Associated service, code:
Prerequisite: You have a telephone that uses tone dialing (DTMF di-
aling) or you can switch your telephone to tone dialing. The tele-
phone is not connected to the system.
j
Set up a call to the system. Enter the station number (contact your ser-
vice personnel).
j
Wait for a continuous tone (if necessary switch the telephone to tone
dialing), then enter the internal number that has been assigned to you
and the associated PIN.
(
Enter the code (necessary only if programmed in the system).
j
Wait for a dial tone and then enter the code, such as
disturb on. Make other inputs as necessary; (refer to the operating in-
structions for pulse and DTMF telephones).
Page 95
1/#1 Page 33
*
Page 86
Page 88
Page 89
Page 91
81/#81 Page 103
*
85/#85 Page 103
*
Page 83
87/#87 Page 61
*
61 Page 47
*
89/#89
*
90/#90 Page 101
*
97/#97 Page 82
*
98/#98
*
7 Page 52
*
83 Page 96
*
Using Other Functions
Page 48
Page 82
97 for Do not
*
97