Switching To Speakerphone Mode; Switching To The Handset - Octopus F200 Operating Instructions Manual

Step by Step
Ending the call:
n
Press the key shown. The LED goes out.
or
s
Press the key shown.
Suggestions for using speakerphone mode:
• Tell the other party that you are using speakerphone mode.
• The speakerphone works bests at a low receiving volume.
• The ideal distance between the user and the telephone set in
speakerphone mode is about 50 cm (approx. 20 inches).

Switching to speakerphone mode

Prerequisite: You are conducting a call via the handset.
n \
Hold down the key and replace the handset. Then release the key.
Proceed with your call.
For US mode
If the country setting is set to US (ask the service personnel), you do
not have to hold down the loudspeaker key when replacing the hand-
set to switch to speakerphone mode.
n
Press the key shown.
]
Replace the handset. Proceed with your call.

Switching to the handset

Prerequisite: You are engaged in a call in speakerphone mode.
^ [
and Lift the handset Proceed with your call.
Making Calls – Basic Functions
27