Technical Data - EDER Titan 80 Pro Manual

49 Titan 80 Pro

Technical data

General data
Length
Width
Height
Weight
Height of spring steel plates
with claws pushed out
Lifting wedge height
Lifting wedge width
Lifting wedge length
Wedge extension
Thread pitch
Max. lifting force
Torques for the fastening screws
Screws of the spring steel
plates
Screws of the drive nut
Screw for extension limiting
You must tighten the shaft nut by hand, then pretension it a fifth
of a turn and fix it with the locking plate.
The fastening screws for the locking plate are glued with Loctite
270.
480 mm
120 mm
165 mm
5600 g
1.5 mm
80 mm
90 mm
224 mm
160 mm
3 mm
25 t
35 Nm
15 Nm
50 Nm
270900_00 | 02.2022
EN