EDER Titan 80 Pro Manual page 41

i
41 Titan 80 Pro
Risk of damage to the Titan 80 Pro due to a felling cut that is too
small at 60 %!
If the felling cut at 60% is smaller than 25 cm, the lifting wedge can
be pushed out and the trapezoidal threaded spindle damaged.
> Therefore, make sure that the depth of the felling cut (at
60%) is at least 25 cm. If the Titan 80 Pro is to be
repositioned, the felling cut depth must be approx. 30 cm.
Inserting a safety wedge
In order to keep the felling cut open and to secure the trunk, you must
insert a safety wedge.
Use safety wedges made of aluminium or plastic.
ATTENTION
EN
270900_00 | 02.2022