Cleaning And Maintenance - EDER Titan 80 Pro Manual

47 Titan 80 Pro

Cleaning and maintenance

> Clean the Titan 80 Pro with a dry cloth.
Do not use any grease-dissolving, caustic or aggressive
>
cleaning agents.
Clean the device from wood residues, chips and other dirt.
>
Sufficient lubrication of all rotating and sliding parts is
>
important for a long service life.
Grease is pressed through the three lateral grease nipples into
>
the device and onto the sliding surfaces between the wedge
and the spring steel plates with the help of a grease gun when
the wedge is retracted.
Regrease the wedge of the Titan 80 Pro after each felling
>
operation.
> Regrease the bearing (grease nipple in the aluminium housing)
once a year.
> Store the Titan 80 Pro in a dry place and protect it from dirt,
dust and moisture.
Risk of damage to the Titan 80 Pro due to moisture!
If the Titan 80 Pro has been exposed to moisture, relubrication is
required immediately.
ATTENTION
EN
270900_00 | 02.2022