EDER Titan 80 Pro Manual page 43

i
43 Titan 80 Pro
If the wood is frozen, the Titan 80 Pro must be inserted deep enough to
grip securely.
Risk of damage to the Titan 80 Pro due to incorrect operation!
If the Titan 80 Pro is not aligned centrally with the felling cut or it
is inserted at an angle to the felling cut, the lifting wedge and the
spring steel plates can be damaged.
Check that the Titan 80 Pro is aligned centrally with the
>
felling cut.
> Check that the felling wedge cannot be pushed against
the hinge.
Lubrication of the Titan 80 Pro
Optimal lifting power can only be achieved with sufficient
lubrication. Dry extension under load can cause damage.
> Lubricate the Titan 80 Pro before each felling operation.
ATTENTION
EN
270900_00 | 02.2022