General Safety Instructions; Safety Instructions For The Workplace - EDER Titan 80 Pro Manual

33 Titan 80 Pro

General safety instructions

> Always follow the instructions in this manual to avoid hazards and
prevent damage.
> Observe the relevant accident prevention regulations and other
generally recognised safety and occupational health rules.
> Only use the device when it is in perfect condition.
> Operate the device exclusively with the protective equipment fitted
or provided by the manufacturer.
> Only use the Titan 80 Pro with technically flawless original
accessories and spare parts.
> It is imperative that the instructions for use of all equipment used are
followed.
> Protective and safety equipment must never be disabled and must
be cleaned if necessary.

Safety instructions for the workplace

> Close off the paths in the felling area with clear warning signs and
barrier tape.
> Make sure that there are no persons or objects in the felling area.
> Keep a safety distance of at least 2 tree lengths between the trees to
be felled.
> Your work site should be free of wood debris, obstacles and tripping
hazards.
> The working area should be a level and tread-proof area with
sufficient freedom of movement.
> To ensure an obstacle-free back cut, clear the back cut area of
branches and other obstacles, at an angle of approx. 45° behind the
tree to be felled.
> Make sure that the tools you need can be reached quickly, but do not
obstruct you in the process.
> Appropriate first aid equipment should be available at the work site.
> Only carry out the work in daylight and in good weather conditions.
> The felling operation must not be carried out in strong winds,
thunderstorms, black ice or frozen ground conditions.
EN
270900_00 | 02.2022