Functions
Automatic line feed
Normally disabled (default setting)
Normally enabled
This is only enabled when using a serial interface. When using another interface, make settings by
using the DIP switches.
USB power saving function
Disabled
Enabled (default setting)
Enabled when anything except for UB-U06/UB-R04/UB-IU01 is installed to the UIB.
The USB power-saving function is valid only when the USB interface communication condition is
set to the vendor-defined class and the system configuration is set so that the USB driver can
support the USB power-saving function.
Paper sensors to output paper end signal
Roll paper out detector (default settings)
Disabled
When using a parallel interface, make settings by using the DIP switches.
Error signal output
Enabled (default setting)
Disabled
When using a parallel interface, make settings by using the DIP switches.
Automatic paper reduction
Extra upper space reduction
Disabled (default setting)
Enabled
Chapter 3 Advanced Usage
61
3