Controlling The Built-In Buzzer - Epson C31CE94061N Technical Reference Manual

Table of Contents

Controlling the Built-in Buzzer

For specifications with a built-in buzzer, a pulse output is sent to the operating pin for the drawer kick

connector, and the built-in buzzer beeps.

You cannot change the volume or the sound emitted, but you can change the buzzing time by changing the

signal pulse width.

This is controlled by a driver or by commands.

ESC/POS Commands

The output command for the specified pulse is used.

For details, see the ESC/POS Command Reference.

For Windows Printer Drivers (APD)

You can set so that the buzzer beeps at the start/end of printing or start/end of a page. For details, see the

manual for drivers.

For API, the API for opening the drawer is used. For details, see the manual for Status API of the driver.

OPOS (OCX Driver)

For details, see the "EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter

(TM Series)".

OPOS for .NET

For details, see the "EPSON OPOS ADK for .NET MANUAL Application Development Guide POSPrinter

(TM-T88VI)".

Epson ePOS SDK

Use the output command for the drawer kick pulse provided in each SDK library. For details, see the user's

manuals provided with each SDK.

When using a cash drawer operated by pin 5 with a built-in buzzer, you need to change the DIP switch

settings for the buzzer circuit so that the buzzer beeps from a pulse signal for pin 2. For details, see

"Setting the Built-in Buzzer (for Model with a Built-in Buzzer)" on page

Chapter 4 Application Development Information

43.

Table of Contents

Tm-t88vi series C31ce94061