Epson C31CE94061N Technical Reference Manual page 126

Auto Reconnect Feature
The auto reconnect feature allows the printer to automatically restore a connection in the following situations if
the Bluetooth connection to the iOS device is lost.
 When the printer is turned on
 When the signal is dropped and then restored
The following shows the printer operations and connection methods when the auto reconnect feature is enabled
or disabled.
Auto Reconnect
Feature
Printer operations
when Bluetooth is
disconnected
Reconnecting to iOS
device
Switch to connection
from other device
* In the following situations, even if the feature is enabled, the same operations are performed as when it is
disabled.
- When pairing is canceled from the connected iOS device.
- When the last Bluetooth device connected was not an iOS device.
- When wireless communication settings are initialized from the printer.
* Disable this feature when using the printer from devices that are not running iOS. Otherwise, it may take
some time to connect.
* For details on the Auto Reconnect Feature, see
126
Enabled
P e r f o r m t h e f o l l o w i n g r e c o n n e c t i o n
sequence.
[Reconnection sequence]
1.The printer tries to connect to the iOS device
to which it was last connected.
2.When step 1 fails, the printer waits for
connections from other devices.
3.If connection is not established in step 2, the
printer tries again to connect to the iOS
device to which it last connected.
Steps 1 and 2 are repeated until a
connection is established.
Reconnect automatically.
Method 1:
After disabling the Bluetooth feature of the connected iOS device, make connection settings on
the Bluetooth device that you want to connect.
(When the auto reconnect feature is enabled, it may take some time to connect.)
Method 2:
After disconnecting from the connected iOS device using applications with the Epson TM Utility
for iOS or Epson ePOS SDK disconnection feature, make settings on the Bluetooth device you
want to connect.
"Interface Setup Mode" on page
Disabled
Wait for a connection from the Bluetooth
device.
Make settings on the Bluetooth settings screen
on the iOS device.
76.