Installing A Memory Module - HP Brio BA400 User Manual

Installing a Memory Module

1 Remove the cover. Refer to page 44.
2 If you think you can access the memory modules easily, lay the PC on its side so you
can reach in to access the system board.
3 If not, open the side panel to gain access to the system board. Refer to "Removing
the Side Panel for Easy Access to System Board Components" on page 46.
Brio BA400 PC
4 Either remove the module you want to replace or locate an empty memory module
socket.
5 Make sure that the socket's clips are open.
6 Align the grooves on the bottom of the module with the corresponding marks on
the socket and push it firmly into place. The clips close automatically.
7 Replace the system board if you removed it earlier. Refer to "Replacing the Side
Panel" on page 48.
8 Replace the cover. Refer to page 45.
Position of memory
modules
Brio BA600 PC

Installing a Memory Module

59