Connecting A Mouse, Keyboard, Power Cords And Monitor - HP Brio BA400 User Manual

Connecting a Mouse, Keyboard, Power Cords
and Monitor
Check that the correct power supply voltage is selected for your country (the voltage is
Caution
set during manufacturing and should already be correct).
Before starting up the PC, connect devices and power cords to the rear of the PC as
shown below:
Mouse
Keyboard
Monitor*
* If you have a Brio BA600 PC with an add-on video card fitted, you must connect your
monitor to the connector on the add-on video card and not to the monitor connector
Note
shown above.
All connectors can go in one way only.

Connecting a Mouse, Keyboard, Power Cords and Monitor

Voltage selector
Power connector
3