Installing An Expansion Card - HP Brio BA400 User Manual

Installing an Expansion Card

Installing an Expansion Card

1 Remove the PC's cover. Refer to page 44.
2 Locate the slot you want to use.
• If fitting a card in an empty slot, unscrew the slot cover facing the slot you want
to use and lift it out.
• If replacing a card in an expansion slot, undo the screw holding the card in place
and lift it out.
3 Aligning the new card carefully, press it firmly into the socket and tighten the
retaining screw.
4 Replace the PC's cover. Refer to page 45.
60