Irq/Event Activility Detect - VIA Technologies P4M890DMP VT8237R Plus User Manual

3-8-1 IRQ/Event Activility Detect

CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
PS2KB Wakeup Select
PS2KB Wakeup From S3/S4/S5
PS2MS Wakeup From S3/S4/S5
USB Resume from S3
VGA OFF
LPT&COM
HDD&FDD
PCI Master
Power on by PCI Card
Modem Ring Resume
RTC Alarm Resume
IRQS Activility Monitoring
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Wake Up On Ring/PME
During Disabled, the system will ignore any incoming call from the modem. During Enabled,
the system will boot up if there's an incoming call from the modem.
Wake-Up on RTC Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.
IRQs Activities
Please refer to section 3-8-1.1
Wake Up Events
Hotkey
Disabled
Disabled
Enabled
On
LPT/COM
On
OFF
Disabled
Disabled
Disabled
Press Enter
F6:Optimized Defaults
41
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults