Port Management; Pppoe Setting - Planet ICA-4250 User Manual

3.5.2 Port Management

User may need to assign a different port to avoid conflict when setting up IP assignment.
Choose the TCP port.
TCP Port
HTTP Port Set up web page connecting port and video transmitting port (Default:
80).
RTSP Port Choose the RTSP port. The RTSP protocol allows a connecting client to
start a video stream. Enter the RTSP port number to use. The default
value is 554.
ONVIF Port Choose the ONVIF port. ONVIF is a global and open industry forum with
the goal to facilitate the development and use of a global open standard
for the interface of physical IP-based security products. In other words, it
creates a standard for how IP products within video surveillance and
other physical security areas can communicate with each other.
If you want log in the camera from internet, please set Port Forwarding of
your router for TCP port and TCP port+1,TCP port is used to login.
By default, the ports are 9060 and 9061.

3.5.3 PPPoE Setting

PPPoE stands for Point to Point Protocol over Ethernet
A standard that builds on Ethernet and Point-to-Point network protocol, it allows Internet
Camera to connect to Internet with xDSL or cable connection. It can dial up your ISP and get a
dynamic IP address. For more PPPoE and Internet configuration, please consult your ISP.
1080p IR Dome PoE IP Camera
- 41 -
ICA-4250