Planet ICA-4250 User Manual page 42

It can directly connect to the xDSL; however, it should be set up in a LAN environment to
program the PPPoE information first, and then connect to the xDSL modem. Power it on again
to enable the device to dial on to the ISP for connecting to the WAN through the xDSL modem.
The procedures are
• Connect to a LAN by DHCP or fixed IP
• Access the device by entering Setting  Network  PPPoE as shown below:
PPPoE Dial-up
PPPoE Account
PPPoE Password
Status
DDNS stands for Dynamic Domain Name Server
The device supports DDNS if your device is connected to xDSL directly. You might need this
feature. However, if your device is behind a NAT router, you will not need to enable this feature.
Because DDNS allows the device to use an easier way to remember naming format rather
than an IP address. The name of the domain is like the name of a person, and the IP address
is like his phone number. On the Internet we have IP numbers for each host (computer, server,
router, and so on), and we replace these IP numbers to easily remember names, which are
organized into the domain name. As to xDSL environment, most of the users will use dynamic
IP addresses. If users want to set up a web or an FTP server, then the Dynamic Domain Name
Server is necessary. For more DDNS configuration, please consult your dealer.
Your ISP provides you with at least one IP address which is used to connect to the Internet.
The address you get may be static, meaning it never changes, or dynamic, meaning it's likely
To enable or disable the PPPoE service here.
Type the user name for the PPPoE service which is provided by ISP.
Type the password for the PPPoE service which is provided by ISP.
Shows the Status of PPPoE connection.
- 42 -
1080p IR Dome PoE IP Camera
ICA-4250