Planet ICA-4250 User Manual page 66

Image Transfer on FTP does not
work.
What is the RTSP command?
What is the Snapshot command?
Video quality of the device
The focus on the camera is bad.
The color of the image is poor or
strange.
Image flickers.
Noisy images occur.
 Default Gateway and DNS server address should be set up
correctly.
 If FTP does not work properly, ask your ISP or network
administrator about the transferring mode of FTP server.
The RTSP command:
rtsp://servername:rtsp port/stander/livestream/0/0
Note. 0=Main stream；1=Sub stream
e.g., rtsp://192.168.0.20:554/stander/livestream/0/1
The Snapshot command:
http://servername/cgi-bin/snapshot?channel=0
Note. 0=Main stream；1=Sub stream
e.g., http://192.168.0.20/cgi-bin/snapshot?channel=0
The lens is dirty or dust is attached. Fingerprints, dust, stain, etc. on
the lens can degrade the image quality.
The configuration on the device image display is incorrect. You need
to adjust the image related parameters such as brightness, contrast,
hue and sharpness properly.
 Wrong power line frequency makes images flicker. Make sure the
50 or 60Hz format of your device.

If the object is dark, the image will flicker. Make the condition
around the camera brighter.
The video images might be noisy if the device is located in a very
low light environment. Make the condition around the camera
brighter or turn the White-light LED on.
- 66 -
1080p IR Dome PoE IP Camera
ICA-4250