Emergency Situations - Pylontech US2000B+ Product Manual

the battery, connect the power cable and try again, if still not work, turn off battery and contact
Pylontech.
2) Unable to discharge:
Disconnect the power cables and measure voltage on battery side, if it is under 44.5V, please
charge the battery; if voltage is above 48V and still cannot discharge, turn off battery and
contact Pylontech.

6. Emergency Situations

1) Leaking Batteries
If the battery pack leaks electrolyte, avoid contact with the leaking liquid or gas. If one is
exposed to the leaked substance, immediately perform the actions described below.
Inhalation: Evacuate the contaminated area, and seek medical attention.
Contact with eyes: Rinse eyes with flowing water for 15 minutes, and seek medical attention.
Contact with skin: Wash the affected area thoroughly with soap and water, and seek medical
attention.
Ingestion: Induce vomiting, and seek medical attention.
2) Fire
NO WATER! Only dry powder fire extinguisher can be used; if possible, move the battery pack to
a safe area before it catches fire.
3) Wet Batteries
If the battery pack is wet or submerged in water, do not let people access it, and then contact
Pylontech or an authorized dealer for technical support.
4) Damaged Batteries
Damaged batteries are dangerous and must be handled with the utmost care. They are not fit
for use and may pose a danger to people or property. If the battery pack seems to be damaged,
pack it in its original container, and then return it to Pylontech or an authorized dealer.
NOTE
Damaged batteries may leak electrolyte or produce flammable gas. If such damage occurs,
please contact Pylontechservice@pylontech.com.cn
Pylon Technologies Co., Ltd.
No. 73, Lane 887, ZuChongzhi Road, Zhangjiang Hi-Tech Park
Pudong, Shanghai 201203, China
T+86-21-51317697 | F
+86-21-51317698
Eservice@pylontech.com.cn
Wwww.pylontech.com.cn
19 / 19
16BISV0903