Advertisement
ASSEMBLY INSTRUCTIONS FOR
THE ASHFORD TRADITIONAL SPINNING WHEEL
Before commencing, please read these instructions
completely, identify the parts and note the
assembly sequence.
Remove any sharp corners or edges and smooth the
surface of the wood with the sand paper provided.
We recommend that the wood surfaces be waxed or
sealed before assembly. This protects the kiln dried
wood from the climatic changes and prevents it
getting dirty or stained.
Tools Required
Hints
Check hardware against full
size illustration.
When you use the Hex wrench,
make sure it is at 90 degrees
and is at the bottom of the
hole.
More Information
How-to videos on You Tube
Watch our how-to videos on You Tube.
www.youtube.com/user/AshfordHandicrafts
Facebook
Join us on facebook.
www.facebook.com/ashford.wheels.looms
Hex Wrench
included
To make assembly easier use
candle wax on the screws.
If the hook is hard to turn use
the Hex wrench.
The Beech timber has a lovely variety of colour
and grain. For a silky smooth matt finish, use the
Ashford Finishing Wax Polish to enhance the natural
colours and character of this timber.
If you are assembling your spinning wheel on a
table, we recommend you protect the surface with a
towel, blanket or cardboard.
Ashford spinning wheels are also available factory
finished in clear lacquer.
Check the directions carefully.
2
The Wheel Magazine
Ashford's annual fibrecraft
magazine. Spinning, weaving,
felting, dyeing and knitting projects,
patterns and articles from around
the world. To receive the glossy
version delivered to you, subscribe
at: www.ashford.co.nz/subscribe
Advertisement
