Advertisement
Check the end of the
adjusting knob is not
protruding beneath the
maiden bar. Then place
the drive belt around
the wheel and large flyer
pulley. Tie the drive belt
and cut off the extra.
Single drive ratios:
The ratio with the drive
belt around the large flyer
pulley is approx. 7:1.
To spin a finer yarn while
treadling at the same
speed, move the drive belt
to one of the centre pulleys
- either 9:1 or 12:1.
To spin a very fine yarn,
move the drive belt onto
the small flyer pulley and
re-tension it. This ratio is
approx. 17:1.
12
Advertisement
