Table of Contents
Advertisement
Quick Links
Ashford Handicrafts Limited
Factory and Showroom: 415 West Street
PO Box 474, Ashburton 7700 New Zealand
Telephone 64 3 308 9087 Facsimile 64 3 308 8664
Email: sales@ashford.co.nz Internet: www.ashford.co.nz
INSTRUCTIONS
e-Spinner Super Jumbo
Ashford Guarantee
Thank you for purchasing this Ashford product. In the unlikely event there is
any fault in manufacture we will replace the item. To validate our guarantee
please visit our website or write to us.
ESPSJ08082019V2
Advertisement
Table of Contents
Related Manuals for Ashford e-Spinner Super Jumbo
Summary of Contents for Ashford e-Spinner Super Jumbo
- Page 1 Ashford Guarantee Factory and Showroom: 415 West Street Thank you for purchasing this Ashford product. In the unlikely event there is PO Box 474, Ashburton 7700 New Zealand any fault in manufacture we will replace the item. To validate our guarantee Telephone 64 3 308 9087 Facsimile 64 3 308 8664 please visit our website or write to us.
- Page 2 Finish flyer and bobbin bearings. Your e-Spinner Super Jumbo has been lacquered - The bobbin and flyer must revolve freely prior to assembly. If desired Ashford Finishing and independently of each other.
- Page 3 Do not use the large groove as this will stretch the drive band. We have used the Country Spinner2 Bobbin as standard on Do not use the the e-Spinner Super Jumbo, so they are interchangeable between large groove. the two spinning wheels.
- Page 4 IMPORTANT: Avoid tripping over or yanking on the foot switch The e-Spinner Super Jumbo will operate only while your or power pack cords as this can damage or break the plugs foot is on the foot switch. Lift your foot off and the and void your warranty.
- Page 5 Spinning Because the e-Spinner Super Jumbo is bobbin lead the Changing the bobbin yarn needs to be strong enough to turn the flyer. Thus, it - Turn the motor off using the ON/OFF switch or foot requires very little tension on the leather brake band. At switch.
- Page 6 4. Ensure the e-Spinner Super Jumbo is switched off before removing the foot switch plug. your hand when plying the two yarns together? 5. Do not use your e-Spinner Super Jumbo in damp or wet conditions. For further plying information refer to “The Ashford 6.
Need help?
Do you have a question about the e-Spinner Super Jumbo and is the answer not in the manual?
Questions and answers